eguest-server (NOC Only)

Points to the EGuest server when executed along with the ‘host‘ option.

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

eguest-server <1-3> host <IPv4/IPv6/HOSTNAME> {http|https}

Parameters

eguest-server <1-3> host <IPv4/IPv6/HOSTNAME> {http|https}


eguest-server <1-3> host <IPv4/IPv6/HOSTNAME> {http\|https}	Configures the EGuest server details in the profile/device context of the NOC (access point/controller). When configured, the NOC posts registration requests and captive-portal related data directly to the specified EGuest server. <1-3> – Configures the EGuest server index number. A maximum of three EGuest servers can be configured. host <IPv4/IPv6/HOSTNAME> – Configures the EGuest server‘s IPv4/IPv6 address or hostname. {http\|https} – Optional. Configures the mode of connection as HTTP or HTTPS. Note: HTTPS is recommended as it uses encryption for transmission and is therefore more secure.

Example

On the NOC, execute along with the ‘host‘ option to point to the EGuest server.

EG-NOC(config-device-74-67-F7-5C-64-4A)#eguest-server 1 host EG-Server https

EG-NOC(config-device-74-67-F7-5C-64-4A)#show context include-factory | include eguest-server
 no eguest-server
 eguest-server 1 host EG-Server https
EG-NOC(config-device-74-67-F7-5C-64-4A)#

Related Commands


no	Removes the EGuest server IP address/hostname configuration